Important Items; Outline; Notes On Use - Fujitsu BBF2004 Series Instruction Manual

10

Important Items

Before using this board, read this instruction manual carefully and understand its contents. Keep
this instruction manual and, when you encounter a problem while using this board, read it again.
What this board is
This board is one of the following products manufactured by Sunhayato Corporation (hereinafter
called the company).
(1) BBF2004 main board (hereinafter called the main board) Type No.: BBF2004-MB
( 2 ) B B F 2 0 0 4 d a u g h t e r b o a r d ( h e r e i n a f t e r c a l l e d t h e d a u g h t e r b o a r d ) Ty p e N o . : B B F 2 0 0 4 -
FR120SQF-CB
The customer's host computer, dedicated emulator (ICE), serial writer and cables are not included.
Application of this board
This board supports the development of a system by using FUJITSU MICROELECTRONICS 32-bit
micro-controller, FR family MCU. Use this board correctly for this purpose. Do not use it for other
purposes.
Constraints
This board is manufactured to support the development. Do not use it as the built-in board for a
device. Also do not use it for the following development purposes.
(1) For life-related and medical devices
(2) For nuclear power development devices
(3) For aircraft device development
(4) For space development devices
Any customer who considers the use of this board for any of the above purposes should contact
Research and Development Div. of the company in advance.
Change in product
To improve the product, its design and specifications, and the contents of the instruction manual
may be revised without prior notice.

1. Outline

This instruction manual explains the setting method used in evaluating serial writing communication
with the MCU with the built-in Flash memory on the daughter board, setting for connecting DSU-FR
Emulator and HDMI cables. The setting method depends on the MCU to be used.
Read this instruction manual carefully and make the setting correctly. For details on setting items
and operation methods other than explained above, refer to "CPU Evaluation Board Instruction
manual BBF2004 SERIES" that comes up with the main board.

2. Notes on Use

Before making serial communication with this board, read the following notes carefully and
understand them well. If this board is used incorrectly, the MCU, peripheral debugging device,
this board, or user programs may be destroyed.
(1) To set a jumper wire or DIP switch, turn off the power of this board and that of the peripheral
debugging device.
(2) Remove all jumper wires not to be used for setting.
(3) After serial writing operation is finished, cancel the settings of the jumper wire and DIP switch
that are set for that serial writing. Then, use DIP switch "SW3" on the main board to set
Operation mode specification pins, MD2, MD1 and MD0 to the operation mode of the MCU to be
used. For details on setting pins MD2, MD1 and MD0, refer to "Usage of this Board " in Item 4
in "CPU Evaluation Board Instruction manual BBF2004 SERIES." For details on the operation
mode, contact Fujitsu Microelectronics Limited.
(4) "XXX" in this instruction manual indicates a silk-print character on the daughter board.
2004-FR120SQF-CB
Caution