Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for YOKOGAWA PBL100
Summary of Contents for YOKOGAWA PBL100
- Page 1 User’s Manual Model 701988 PBL100 Logic Probe IM 701988-01E 6th Edition...
- Page 2 701988). This user’s manual describes the functions, operating procedures, specifications, handling precautions, and other important information about the PBL100 Logic Probe. To ensure correct use, please read this manual before beginning operation. After reading this manual, keep it in a convenient location for quick reference in the event a question arises during operation.
- Page 3 The following markings are used in this manual. Improper handling or use can lead to injury to the user or damage to the instrument. This symbol appears on the instrument to indicate that the user must refer to the user’s manual for special instructions.
-
Page 4: Checking The Contents Of The Package
The accessories below are included. If some items are missing or otherwise inconsistent with the contents description, please contact your dealer or nearest YOKOGAWA representative. • PBL100 probe: 1 • Standard accessories: 1 set • Carrying case: 1 0 1 2 3 4... -
Page 5: Safety Precautions
The following safety precautions must be taken to ensure safe and correct operation of the instrument. The instrument’s functions may not work if used in a manner not described in this manual. YOKOGAWA bears no responsibility for, nor implies any warranty against damages occuring as a result of failure to take these precuations. - Page 6 • Before use, inspect and check the operation of the probe to confirm that no problems have been caused by harsh storage or transport conditions. If problems are found, please contact your nearest YOKOGAWA dealer or representative. • This instrument is not drip- or dust-proof. Do not use in areas where it may come into contact with water or a large amount of dust.
- Page 7 French AVERTISSEMENT • Veillez à éviter toute électrocution lors de la connexion de la sonde au circuit à tester. • Ne déconnectez jamais la sonde de l’oscilloscope lorsqu’elle est connectée au circuit à tester. • Veillez à ce que la sonde se soit pas mouillée et ne manipulez pas la sonde avec les mains mouillées.
- Page 8 Si des problèmes sont détectés, veuillez contacter votre revendeur ou représentant YOKOGAWA le plus proche. • Cet instrument n’est pas étanche aux gouttes d’eau ou à la poussière. Ne l’utilisez pas dans des zones où il peut entrer en contact avec de l’eau ou une grande quantité...
-
Page 9: Regulations And Sales In Various Countries And Regions
When disposing of products in the EEA or UK, contact your local Yokogawa office in the EEA or UK respectively. * EEA: European Economic Area Authorized Representative in the EEA Yokogawa Europe B.V. -
Page 10: Table Of Contents
Contents Foreword ..........................i Checking the Contents of the Package ................iii Safety Precautions ......................iv Regulations and Sales in Various Countries and Regions ..........viii Overview ...........................1 Names and Functions of Parts ..................2 Usage Precautions ......................3 Operating Procedure ......................3 Product Specifications ......................5 IM 701988-01E... -
Page 11: Overview
Overview The PBL100 is an 8-bit input logic probe with a maximum toggle frequency of 100 MHz that is used with oscillscopes equipped with logic input. * For oscilloscope models that are compatible with this instrument, please contact your nearest YOKOGAWA representative. -
Page 12: Names And Functions Of Parts
Names and Functions of Parts Probe body Probe lead set GND lead Cable Probe leads To the digital oscilloscope’s GND lead logic signal input port Microclip (Black: for GND leads) Microclip (Red: for probe leads) Cable Connects to the oscilloscope’s logic signal input port. Probe Lead Set The points of connection to the circuit under test, consisting of 8 probe leads and 2 GND leads. -
Page 13: Usage Precautions
Connect the logic probe’s cable to the oscilloscope’s logic signal input port. Connect the logic probe’s probe and GND leads to the circuit under test. * For oscilloscope models that are compatible with this logic probe, please contact your nearest YOKOGAWA representative. IM 701988-01E... - Page 14 Usage Example Probe Lead Set (2.54 mm Pitch Pin Header) Probe Lead Set + Microclips IM 701988-01E...
-
Page 15: Product Specifications
Product Specifications Electrical Specifications Inputs Vertical resolution 1 bit Max. nondestructive input voltage range ±42 V (DC + ACpeak) or 29 Vrms Threshold level range ±40 V Threshold level resolution 0.05 V Threshold level accuracy ±(100 mV + |3% of setting|) Input voltage range ±... - Page 16 Connected to the DLM2000 series mixed signal oscilloscope, with the logic probe’s lead set terminated at 50 Ω. Cable condition Attach a ferrite core (TDK: ZCAT2035-0930A, YOKOGAWA part number: A1190MN) to both ends of the cable (see figure below). 6 For conformity to environmental regulations and/or standards other than EU,...
- Page 17 Maintenance Users can replace the cable or probe lead set themselves if they become damaged. Please use the following components. Name Part Number Probe lead set B8099BS Cable (1.5 m) B9852VN Replacing the Probe Lead Set Remove the probe lead set from the logic probe, then align the new probe lead set with the guide on the probe and insert as shown in the figure below.
Need help?
Do you have a question about the PBL100 and is the answer not in the manual?
Questions and answers