Table of Contents
Advertisement
SP MODE
Mode No.
Class 1
Class 2
For details on the correct way to use SP 6006, see the ADF service manual.
6009
ADF Free Run
6105 *
Finisher Staple
Position
Adjustment
6107
Finisher Free
Run
7004
Total Copy
Counter Reset
7804
PM Counter
Reset
7807
SC/Jam Counter
Reset
7808
Resets
Counters
(except for the
total counter)
7810
User Code
Number Reset
7901
1
ROM/CPU
Version
(Operation
Panel)
2
ROM/CPU
Version
(MSIS)
All manuals and user guides at all-guides.com
Use the / key to toggle between +
and -.
Performs an ADF free run.
This is a general free run controlled
from the copier. For more detailed
free run modes, see the DF manual.
Adjusts the staple position when
using the finisher.
Use the / key to toggle between +
and -.
One staple position: A larger value
causes the staple position to shift
inward.
Two staple position: A larger value
causes both staple positions to shift
to the rear side of the machine.
Performs a finisher free run (without
stapler).
This is a general free run controlled
from the copier. For more detailed
free run modes, see the finisher
manual.
Japanese version only.
Do not change this value.
Resets the PM counter.
Resets the SC and jam counters.
Resets the following counters:
On the data list, between "Total No of
Org from ADF" and "Number of SCs:
Others", and between "Counter from
ADF" and "Staple Mode".
Resets the user code numbers.
Displays the operation panel board
ROM version.
Displays the ROM version for the
MSIS on the SCU board.
38
Function
14 August 1997
Settings
- 1~ +3.5
0.5 mm/step
+0.0 mm
To see the
current
counter
values, print
the SP mode
data lists (SP
5990).
Advertisement
Table of Contents
