Table of Contents
Advertisement
SP MODE
Mode No.
Class 1
Class 2
2101 *
2 *
Trailing Edge
Erase Margin
(Printing)
3 *
Left Side Edge
Erase Margin
(Printing)
4 *
Right Side Edge
Erase Margin
(Printing)
2103 *
LD Power
Adjustment
2201 *
1 *
Development
Bias Adjustment
(for copying)
2 *
Development
Bias Adjustment
(for ID sensor
pattern)
2207
Forced Toner
Supply
2208 *
1 *
Toner Supply
Mode
All manuals and user guides at all-guides.com
The specification is 3
"Replacement and Adjustment -
Copy Image Adjustments" for details
on SP2101.
Adjusts the trailing edge erase
margin.
The specification is 2
Adjusts the left side erase margin.
The specification is 2
Adjusts the right side erase margin.
The specification is 2
Adjusts the LD power.
Do not change the value.
Adjusts the development bias during
copying.
This can be adjusted as a temporary
measure if faint copies appear due to
an aging drum.
Adjusts the development bias when
making the ID sensor pattern.
This can be adjusted as a temporary
measure if faint copies appear due to
an aging drum.
Forces the toner bottle to supply
toner to the toner supply unit for 30
seconds.
Toner supply finishes automatically
after 30 seconds. This process is not
normally needed in the field for this
model. At installation, doing the 50-
page free run also supplies toner to
the development unit.
Selects the toner supply mode.
Use fixed supply mode only as a
temporary measure if process control
is not working.
22
Function
r
2 mm. See
r
2 mm.
r
1.5 mm.
+
25
.
mm.
-
15
.
14 August 1997
Settings
0.0 ~ 9.0
0.1 mm/step
2.0 mm
0.0 ~ 9.0
0.1 mm/step
2.0 mm
0.0 ~ 9.0
0.1 mm/step
2.0 mm
-127 ~ +127
2
2.1
W/step
+0
200 ~ 700
1 V/step
550 V
200 ~ 700
1 V/step
310 V
Detect
Fixed
Advertisement
Table of Contents
