Table of Contents
Advertisement
14 August 1997
Mode No.
Class 1
Class 2
5106 *
ADS Level
Selection
5118 *
Disable Copying
5220 *
Auto Stamp
Function
5305
Auto Off Mode
5501 *
1
PM Alarm
2
PM Alarm
Interval
5801
Memory All
Clear
5802
Free Run
All manuals and user guides at all-guides.com
Selects the image density level that
is used in ADS mode.
Selects whether the copy function is
disabled or not.
Selects whether the auto stamp
function is enabled or not.
This SP mode is used only for
115V machines (Energy Star
standardization).
Selects whether the auto off timer
setting is enabled or disabled
When "disabled" is selected, the auto
off timer range will be wider than the
default timer range. (In UP mode, the
user will be able to select a time
between 0 and 120 minutes.) If "0" is
selected, the auto off timer function is
disabled.
Selects whether the PM alarm is
enabled or not.
Sets the PM interval, with an alarm.
When the setting is "0", this function
is disabled.
Resets all correction data for process
control and all software counters.
Also, returns all modes and
adjustments to the default settings.
See the "MEMORY ALL CLEAR"
section for how to use this SP mode
correctly.
Normally, this SP mode should not
be used.
It is used only after replacing the
NVRAM, or when the copier
malfunctions due to a damaged
NVRAM.
Performs a free run. The scanner
scans once and the printer prints for
the number of copies requested.
35
Function
SP MODE
Settings
1 ~ 7
1 notch /step
4
No
Yes
On (115V
machine)
Off (230V
machine)
Enabled
Disabled
Enabled
Disabled
0 ~ 255
1k copies/step
120 k copies
Advertisement
Table of Contents
