Table of Contents
Advertisement
SP MODE
Mode No.
Class 1
Class 2
3
HDD Setting
(Spindle
Control)
4
HDD Setting
(Head
Retraction)
5
HDD Setting
(Total Storage
Capacity)
6
HDD Setting
(Bad Sector
Information
Reset)
4911
7
HDD Setting
(Bad Sector
Display)
5019
LCT Paper Size
Setting
5104 *
A3/11"x17"
Double Count
All manuals and user guides at all-guides.com
Decides the disk drive motor (spindle
motor) stop timing.
Yes: The hard disk stops in low
power mode. The first copy after
returning to standby will take longer.
No: The hard disk keeps going in low
power mode
Press Enter to move the head of the
hard disk away from the disk while
the disk is turning. The head
automatically moves back when a
copy is made.
This SP should be performed when
the machine will be moved without
turning the main switch off.
Input the total storage capacity of the
hard disk at replacement.
In future, hard disks of various sizes
may be available. In this case, use
this SP mode when installing a new
disk.
Resets the bad sector information
which is stored in the E
the EX-IPU board.
This SP should be performed when
the hard disk is replaced.
Displays the number of bad sectors
there are on the hard disk.
Selects the paper size for the LCT.
When changing the setting, the
position of the side fences for the
LCT should be changed.
Specifies whether the counter is
doubled for A3/11"x17" paper.
If "YES" is selected, the total counter
and the current user code counter
counts up twice when A3/11"x17"
paper is used.
34
Function
2
PROM on
14 August 1997
Settings
A4 (230V
machines)
8 1/2" X 11"
(115V
machines)
No
Yes
Advertisement
Table of Contents
