Table of Contents
Advertisement
14 August 1997
8. SERVICE TABLES
8.1 SP MODE
NOTE: 1) Items marked "#" are new or modified items.
2) In the Function column, comments are in italics.
3) In the Settings column, the default value is in bold letters.
4) An asterisk " * " after the mode number means that this mode is stored
in the NVRAM. If you do a RAM reset, all these SP modes will be reset
to their factory settings.
Mode No.
Class 1
Class 2
1001 *
Leading Edge
Registration
1002 *
1 *
Side-to-Side
Registration
(Duplex)
2 *
Side-to-Side
Registration
(1st paper feed)
3 *
Side-to-Side
Registration
(2nd paper feed:
Option PFU tray
1)
All manuals and user guides at all-guides.com
Adjusts the printing leading edge
registration using Trimming Area
Pattern (SP2902-3, No.10).
Use the / key to toggle between +
and -.
The specification is 3
"Replacement and Adjustment -
Copy Image Adjustments" for details.
Adjusts the printing side-to-side
registration from the duplex tray
using the Trimming Area Pattern
(SP2902-3, No.10).
Use the / key to toggle between +
and -.
The specification is 2
"Replacement and Adjustment -
Copy Image Adjustments" for details
on SP1002
Adjusts the printing side-to-side
registration from the 1st paper feed
station using the Trimming Area
Pattern (SP2902-3, No.10).
Use the / key to toggle between +
and -.
The specification is 2
Adjusts the printing side-to-side
registration from the 2nd paper feed
station using the Trimming Area
Pattern (SP2902-3, No.10).
Use the / key to toggle between +
and -.
The specification is 2
19
Function
r
2 mm. See
r
1.5 mm. See
r
1.5 mm.
r
1.5 mm.
SP MODE
Settings
+9 ~ -9
0.1 mm/step
+ 0.0 mm
+9 ~ -9
0.1 mm/step
+ 0.0 mm
+9 ~ -9
0.1 mm/step
+ 0.0 mm
+9 ~ -9
0.1 mm/step
+ 0.0 mm
Advertisement
Table of Contents
