Stihl SR 430 Instruction Manual page 10

English
2
4
2
4
1
► Push the hose clamp (1) onto the pleated
hose (3).
► Line up the marks on the hose clamp (1) and
elbow (2) – as shown.
► Secure the hose clamp (1) with the screw (4).
3.3 Fitting the antistatic system –
SR 450 only
10
1
3
3
2
► Attach the antistatic wire (1) and chain (2) to
the blower housing with screw (3).
3.4 Fitting the pleated hose on the
elbow – SR 450 only
► Push the antistatic wire (1) into the pleated
hose (2).
4
► Push narrow hose clamp (3), marks facing left,
onto the elbow (4).
► Route the antistatic wire (1) through the slot in
the hose clamp (3).
► Push the pleated hose (2) onto the elbow (4).
1
3 Assembling the Unit
1
2
3
2
1
0458-454-0121-G