Information Before You Start - Stihl SR 430 Instruction Manual

English
8 Information Before You
Start
NOTICE
With the engine stopped and before starting,
check the air intakes between the backplate and
powerhead for blockages and clean if necessary.
8.1 Control handle
1
2
1 Setting lever
2 Throttle trigger
3 Throttle trigger lockout
8.2 Functions of setting lever
Run position F
Engine runs or is ready to start. Throttle trig‐
ger (2) can be moved to any position.
Stop position 0
Ignition is interrupted, engine stops. The setting
lever (1) is not locked in this position. It springs
back to the run position. The ignition is again
ready for operation.
Throttle trigger limiter position
Travel of throttle trigger can be limited in two
stages:
1)
Not in all versions, country-specific
14
3
1)
1)

8 Information Before You Start

1
a 1/3 throttle
b 2/3 throttle
To disengage the travel limiter,
► Return the setting lever (1) to the run posi‐
tion F.
1)
Throttle lock
2
The throttle trigger (2) can be locked in any
required position.
To disengage the lock:
► Return the setting lever (1) to the run posi‐
tion F.
a
b
1
0458-454-0121-G