Starting / Stopping The Engine - Stihl SR 430 Instruction Manual

9 Starting / Stopping the Engine

9 Starting / Stopping the
Engine
9.1 Before Starting
► Close valve lever (1) for solution feed.
9.1.1 Additionally on SR 450:
► Close the metering lever (2) for dusting and
spreading mode.
9.2 Starting the Engine
► Observe safety precautions.
NOTICE
Start your unit on a clean, dust-free surface only
to ensure that no dust is sucked in.
► The setting lever must be on F
0458-454-0121-G
1
2
H
LA
► Press the manual fuel pump bulb (3) at least
five times – even if the bulb is filled with fuel.
9.2.1 Cold engine (cold start)
4
► Press in the choke knob (4) and turn it to c.
9.2.2 Warm engine (warm start)
4
► Press in the choke knob (4) and turn it to o.
Also use this setting if the engine has been run‐
ning but is still cold.
English
L
15