Operational Configuration - NetBurner SBL2e User Manual

A screen-shot of IPSetup is shown below:

3.3 Operational Configuration

Once the network parameters are, you can use the web server interface or serial AT commands to
modify the settings of your SBL2e. We recommend using the web interface first to familiarize
yourself with the operation of the SBL2e. To access the web page, click on the Launch Webpage
button in IP Setup, or you can open your web browser, and enter the numeric IP Address in the
address field (e.g. http://10.1.1.110).
SBL2e Dual Serial-to-Ethernet User's Manual Page 6
Downloaded from Elcodis.com electronic components distributor