System/Network Configuration - NetBurner SBL2e User Manual

8.3 System/Network Configuration

Example: AT#SYSIP=10.1.1.100<cr>
#SYS
IP=<ip address>
MK=<mask ip>
GW=<gateway ip>
DN=<dns ip>
DH=1
NB=<device name>
UN=<string>
PW=<string>
GS=<enable/disable gpio server>
GP=<gpio server listen port>
#CUR //Get current active values
IP?
MK?
GW?
DN?
ST?
S0?
S1?
Return Values:
 Connected to IP xx.xx.xx.xx
 Listening on port xx
 UDP mode with learned send-to IP Address : xx.xx.xx.xx
 UDP mode send to Address : xx.xx.xx.xx
 Idle
SBL2e Dual Serial-to-Ethernet User's Manual
Downloaded from Elcodis.com electronic components distributor
// To enable DHCP, set IP to 0.0.0.0.
// Return port status for current port
// Return port status for port 0
// Return port status for port 1
// 0 = disable, 1 = enable
Page 21