Ac Input - Pepperl+Fuchs PS1000-A6-12.16 Technical Information

Power Supply PS1000-A6-12.16

AC Input

5 AC Input
AC input
AC input range
Allowed voltage L or N to earth Max.
Input frequency
Turn-on voltage
Shut-down voltage
External input protection
Input current Typ.
1
Power factor Typ.
2
Crest factor Typ.
Start-up delay Typ.
Rise time Typ.
Typ.
Turn-on overshoot Max.
1
The power factor is the ratio of the true (or real) power to the apparent power in an AC circuit.
2
The crest factor is the mathematical ratio of the peak value to RMS value of the input current waveform.
Figure 5.1
Figure 5.2
Nom. AC 100-240V
Min. 85-264Vac
Min. 264-300Vac
300Vac
Nom. 50–60Hz
Typ. 80Vac
Typ. 70Vac
Typ. 55Vac
See recommendations in chapter 27.3
AC 100V AC 120V
2.11A 1.74A
0.99 0.99
1.5 1.65
300ms 290ms
18ms 18ms
35ms 35ms
200mV 200mV
P
OUT
Input voltage range
Input
Voltage
Output
Voltage
S tart-up
delay
Turn-on behavior, definitions
Suitable for TN-, TT- and IT mains networks
Continuous operation
For maximal 500ms
Continuous, IEC 62103
±6%
Steady-state value, see Figure 5.1
Steady-state value, see Figure 5.1
Dynamic value (250ms)
AC 230V
0.92A At 12V, 16A, see Figure 5.3
0.96 At 12V, 16A, see Figure 5.4
1.65 At 12V, 16A
240ms See Figure 5.2
18ms At 12V, 16A const. current load, 0mF
load capacitance, see Figure 5.2
35ms At 12V, 16A const. current load, 16mF
load capacitance, see Figure 5.2
200mV See Figure 5.2
R ated
input range
max.
500ms
85V 264V 300Vac
- 5%
R is e
Time
V
IN
9