Related Manuals for ALLEN & HEATH IP8
Summary of Contents for ALLEN & HEATH IP8
- Page 1 Getting Started Guide Before starting please check www.allen-heath.com for the latest software and documentation. AP10354 Issue 3...
- Page 2 Check with your Allen & Heath distributor or agent for any additional warranty information which may apply. If further assistance is required please contact Allen & Heath Ltd. IP8 Getting Started Guide AP10354 Issue 3...
-
Page 3: Important - Read Before Starting
AHM processor guides available for download at www.allen- heath.com. Check for the latest version of this Getting Started Guide. You can also join our Allen & Heath Digital Community to share knowledge and information with other users. IP8 Getting Started Guide AP10354 Issue 3... - Page 4 Register your product Register your product online at www.allen-heath.com/register. IP8 Getting Started Guide Copyright © 2016 Allen & Heath. All rights reserved. ALLEN&HEATH Allen & Heath Limited, Kernick Industrial Estate, Penryn, Cornwall, TR10 9LU, UK http://www.allen-heath.com...
-
Page 5: Table Of Contents
Connect and power up..................11 Set up the unit Name and IP Address ............ 11 System connection ................. 12 Ethernet Switch ..................12 Programming the Remote Controller ............13 Dimensions ..................... 14 Technical specs ....................14 IP8 Getting Started Guide AP10354 Issue 3... -
Page 6: Introduction
12V Power Supply 1. Introduction The IP8 is part of the Allen & Heath IP Series of remote controllers. It interfaces with the AHM, dLive or Avantis mixing system via standard TCP/IP Network connections and can therefore be networked with other controllers, computers and third party devices using standard Ethernet infrastructure. -
Page 7: Mounting The Remote Controller
2. Mounting the Remote Controller The IP8 can be used free standing or mounted in a plinth. Use the holes indicated below for 6B screws when mounting in a plinth, podium or furniture. Ensure adequate air flow around the unit. -
Page 8: Front Panel
LCD Displays – 8x colour displays providing information on the channels and on the function of the SoftKeys. Upper SoftKey function Channel type, name and Level bar and meter colour Lower SoftKey function IP8 Getting Started Guide AP10354 Issue 3... - Page 9 48 individual Inputs to a monitor mix, or set up the Layers to control the sound to 6 different zones in a venue. Other available functions include Send On/Off, PAFL, Mute, Scene Recall, Tap Tempo, Talkback Assign, Custom MIDI. IP8 Getting Started Guide AP10354 Issue 3...
-
Page 10: Rear Panel
Network – Fast Ethernet, PoE+ compliant Network port for connection to the mixing system. The IP8 provides a locking Neutrik EtherCon socket to protect the connection. Use cables fitted with locking EtherCon for touring or rental applications. The maximum cable length is 100m. Use STP (shielded twisted pair) CAT5 or higher cables. -
Page 11: Connect And Power Up
255.255.255.0 Gateway 192.168.1.254 There are two ways of editing these settings: Browser access – Connect a PC or Mac computer to the Network port of the IP8. Set your computer to a compatible, static Address, example 192.168.1.100 with Subnet 255.255.255.0. Open a web browser and type the IP8 default IP Address 192.168.1.73 in the URL bar. -
Page 12: System Connection
5.2 System connection Connect the IP8 to a dLive / Avantis / AHM Network port using a CAT5 cable up to 100m long. Power up the IP8 by plugging the external PSU into the DC In socket. The port Lnk/Err indicator flashes at a steady rate when the link is established. -
Page 13: Programming The Remote Controller
/ Director software to configure the controller as appropriate. With dLive, the IP8 can be set to link to either the MixRack or the Surface. This is regardless of the physical Network connection, for example the unit might be physically connected to the MixRack but set to link to the Surface. -
Page 14: Dimensions
6. Dimensions 253.40 12.20 IP8 Getting Started Guide AP10354 Issue 3... -
Page 15: Technical Specs
0 deg C to 35 deg C (32 deg F to 95 deg F) Dimensions and Weights Width x Depth x Height 291 x 205 x 61 mm IP8 (boxed) 380 x 350 x 165 mm Weights 2.5kg (5.5lbs) IP8 (boxed) 2.6kg (5.7lbs) IP8 Getting Started Guide AP10354 Issue 3...
Need help?
Do you have a question about the IP8 and is the answer not in the manual?
Questions and answers