Chapter 3. Access The Web Ui; Log In To The Web Ui; Explore Web Ui Features - TCL LinkHub User Manual

Chapter 3. Access the web UI

This chapter introduces how to get access to the web UI of your CPE, and gives you a glimpse
of the web UI.

3.1 Log in to the web UI

To log in to the web UI, follow these steps:
1. Open a web browser on the device connected to the CPE network wiredly or wirelessly.
2. Go to http:/ /192.168.1.1, and follow the on-screen instructions to finish the login process.
Note: For the default login information, refer to the bottom label of your CPE.

3.2 Explore web UI features

The web UI is mainly comprised of the following sections: Status, Home, Services, Settings, and
System. You can click on each section to display more information about your CPE.
Besides, commonly-used status icons are displayed in the web UI. Status icons give you
information about your CPE.
Status icon
3G 4G
or The network your CPE connects to.
The number of the signal bar indicates the signal strength. The more
signal bars it shows, the stronger the signal.
The CPE connects to SIM card network.
The CPE connects to WAN network.
The CPE disconnects from WAN network.
New messages or unread messages.
The SMS inbox is full.
Wi-Fi is enabled.
Wi-Fi is disabled.
What it means
9