TCL LinkHub User Manual page 5

5. Network indicator
6. External antenna port
7. WPS button
8. Power button
9. Micro SIM card slot
10. Reset button
11. LAN port
12. LAN/WAN port
13. Power connector
When the CPE downloads and installs software updates, you will see the indicators
flash on and off in a sequence. Do not power off your CPE during this process as it
may cause device malfunction.
• Blinking blue: the device is registered to the network.
• Solid blue: the device is connected to the network.
• Solid red: micro SIM card is not available or the device is
not registered to the network.
Install an external antenna to improve signal reception.
Press the button for 3 seconds to enable the WPS function.
The WPS function will be automatically disabled if a WPS
connection is not established within 2 minutes.
• Press for 3 seconds to power off your device.
• Press for 1 second to power on your device.
Insert a micro SIM card in the slot.
Use a paperclip to press the button for 3 seconds to reset
the device.
Used to connect to wired devices such as computers or
switches.
Used to connect to an internet source or wired devices such
as computers or switches.
Used to connect to the power adapter.
5