TCL LinkHub User Manual page 14

Country/Region
Channel
802.11 Mode
AP isolation
Bandwidth
WPS
Wi-Fi Protected Setup (WPS) is a wireless network security standard that tries to make
connections between your CPE and wireless devices faster and easier.
If your wireless device is WPS-supported, you can access the CPE Wi-Fi network through a
WPS connection. In this option, there are two WPS modes available.
WPS PIN
PBC
Security
PIN management
Enable SIM PIN
Disable SIM PIN
Select country or region in this item.
Different regions use different channels: Channel 1-11 in FCC (US) /
IC (Canada), Channel 1-13 in ETSI (Europe), and Channel 1-13 in MKK
(Japan).
The mode is set to 802.11b/g/n by default.
The AP isolation function enables you to create a separate virtual
network for each wireless client that is connected to your CPE network.
When this function is enabled, all wireless devices in the network will
not be able to communicate with each other.
Select the available options from the drop-down menu.
1. Set a WPS PIN code, and click Apply.
2. Enable the WPS function of your wireless device, and enter the WPS
PIN code within 2 minutes to make a WPS connection.
1. Click Apply. The WPS function is enabled for 2 minutes.
2. Enable the WPS function of your wireless device to make a WPS
connection.
1. When the SIM PIN feature is disabled, click
2. Set an SIM PIN code that is 4 to 8 digits long.
3. Click Apply.
1. When the SIM PIN feature is enabled, click
2. Enter the current SIM PIN code.
3. Click Apply.
14
.
.