Mercedes-Benz B-Class Owner's Manual page 393

390 Wheels and tyres
390
% V V ehicles wit ehicles with a tyr h a tyre pr e pressur essure loss w
system: syst em: if an emergency spare wheel is tted,
the tyre pressure loss warning system cannot
function reliably. Only restart the system
again when the emergency spare wheel has
been replaced with a new wheel.
V V ehicles wit ehicles with a tyr h a tyre pr e pressur essure monit
t t em: em: if an emergency spare wheel is tted, the
tyre pressure monitoring system cannot func-
tion reliably. For a few minutes a er an emer-
gency spare wheel is tted, the system may
still display the tyre pressure of the removed
wheel. Only restart the system again when the
emergency spare wheel has been replaced
with a new wheel.
Be sure to also observe the following further rela-
ted subjects:
Notes on tyre pressure ( page 375)
/
R
Tyre pressure table ( page 376)
R /
Notes on tting tyres ( page 379)
R /
Fitting an emergency spare wheel
R
( page 383)
/
e loss war arning ning In ating t t he emerg In ating
* N N O O TE TE Overheating due to the tyre in ation
compressor running too long
Do not run the tyre in ation compressor
#
for longer than ten minutes without inter-
e monitor oring sy ing sys- s-
ruption.
R R eq equir uirements: ements:
The emergency spare wheel has been tted cor-
rectly. (
/
Comply with the manufacturer's safety notes on
the sticker of the emergency spare wheel and on
the tyre in ation compressor.
Remove the sticker with the label 80 km/h
#
from the tyre in ation compressor housing
and a x it to the instrument cluster within the
driver's eld of vision.
Remove the tyre in ation compressor from the
#
stowage space under the luggage compart-
ment oor . (
he emergency spar ency spare wheel e wheel
page 383)
page 356, 355)
/
Pull ller hose 1 and plug 3
#
in ation compressor housing.
Insert plug 7 of ller hose
#
on the tyre in ation compressor and then turn
it until plug 7 engages.
Unscrew the cap from the valve on the emer-
#
gency spare wheel.
Screw union nut 2 of ller hose
#
valve.
Make sure on and o switch
#
in ation compressor is set to 0 0 .
Insert plug 3 in a socket in your vehicle.
#
Cigarette lighter socket
R
out of the tyre
1 in the socket
1 onto the
4 of the tyre