Mercedes-Benz B-Class Owner's Manual page 216

% When the vehicle is switched on (the õ
display is lit in the Instrument Display), socket
ap 1 cannot be opened.
Press catch 7 to the le and fold open
#
socket cover 5.
%
The CCS charging cable connector requires
connections 6 and 8. Therefore, it is nec-
essary to open both parts of socket cover 5.
Insert the CCS charging cable connector into
#
the vehicle socket to the stop.
Make sure that the charging cable is not taut
when inserted.
The # indicator lamp 4
play 3 ash orange and, as soon as the high-
voltage battery is charged, green.
When the charging cable is connected to the vehi-
cle, the vehicle cannot be started or moved.
At the start of the charging process, the charge
level display is shown in the Instrument Display
with a charging prediction. The charging predic-
tion either refers to the predicted charge level at
the set departure time, or the time at which the
high-voltage battery will be fully charged.
% Depending on the temperature, the fan and
battery cooling system may audibly switch on
during the charging process.
% If the vehicle is idle for lengthy periods and
connected to the mains supply, the high-volt-
age battery will be recharged automatically as
needed or when electrical consumers are
activated (e.g. the pre-entry climate control).
Ending the dir Ending t he direct curr
4) 4)
R R eq equir uirements: ements:
The distance between the key and the vehicle
R
and status dis-
does not exceed 1 m.
ect current c ent char harging pr ging process (mode ocess (mode
Driving and parking 213
Combo 1 vehicle socket Combo 1 v ehicle socket
Press charging interruption button 3.
#
The charging process is ended. The % indi-
cator lamp 1 lights up white. The vehicle
socket is unlocked.
Press and hold button 2 on the charging
#
cable connector and remove the charging
cable connector from the vehicle socket.
213