Mercedes-Benz B-Class Owner's Manual page 187

184 Driving and parking
184
Press DYNAMIC SELECT button 2.
#
The DYNAMIC SELECT menu appears in the
instrument display.
Press DYNAMIC SELECT button
#
The chosen drive program appears.
Con guring Con gur ing D D YN
t t em) em)
Multimedia system:
©
4 5
DYNAMIC SELECT
5
Se Setting dr tting driv ive pr e progr
Select Individual
#
Select and set a category.
#
Switc Switching t hing the r he rest
Switch Ask when starting
#
F F unction on: unction on: the next time the vehicle is started a
prompt appears asking whether the last active
drive program should be restored.
F F unction on: unction on: the next time the vehicle is started a
prompt appears asking whether the last active
drive program should be restored. If the ECO
2 again.
start/stop function was deactivated, an additional
prompt appears asking if the function should
remain deactivated.
YNAMIC SELECT (multimedia sy AMIC SELECT (multimedia sys- s-
Settings Vehicle
5
ogram I am I
configuration.
estor oration displa ation display on or y on or o o
on or o .
% The prompt appears only if the previously
active settings deviate from the standard set-
tings.
F F unction unction o : o : the next time the vehicle is started
the A drive program is set automatically. The
ECO start/stop function is activated automati-
cally.
F F unction unction o : o : if the Î drive program was the
last one active, and all requirements for the drive
program are ful lled, this will be automatically
selected the next time the vehicle is started. If
another drive program was active, then the A
drive program is set automatically.
%
This function must be activated for each user
pro le separately. Only when this function is
activated will the drive program and ECO
start/stop setting for the previous journey be
saved for the respective user pro le.
%
This function must be activated for each user
pro le separately. The drive program for the
respective user pro le of the last driver is only
stored if this function is activated.