Mercedes-Benz B-Class Owner's Manual page 182

Manually se Manuall y setting r tting recuper ecuperativ ative deceler e deceleration
%
In the Î drive program, you can use the
steering wheel gearshi paddles to manually
adjust the intensity of recuperation in overrun
mode.
%
When the vehicle is started again or transmis-
sion position h is engaged again, the stand-
ard setting is automatically set.
The following recuperation levels are available:
hà Intelligent, anticipatory recuperation
R
with ECO Assist (standard setting)
( page 179)
/
hq No recuperation: the vehicle rolls freely
R
ation h Normal recuperation
R
h± Increased recuperation; strong deceler-
R
ation in overrun mode, e.g. for driving on
downhill gradients
h±± Maximum recuperation: maximum
R
deceleration in overrun mode
T T o incr o increase r ease recuper
#
paddle 1.
T T o r o reduce r educe recuper ecuperation:
#
paddle 2.
S S t t andar andard se d setting:
#
dle 1 or 2
h again.
ecuperation: ation: brie y pull gearshi
ation: brie y pull gearshi
tting: pull and hold gearshi pad-
or engage transmission position
Driving and parking 179
The Instrument Display shows currently set recu-
peration level 1, for example, hÃ.
Eco Assist function (plug-in h Eco Assis t function (plug-in hybr ybrid) id)
%
The following function is country-dependent
and available only in conjunction with an inte-
grated hard drive navigation system.
ECO Assist is active only in drive programs A,
Î, Ï and ;, and only in transmission
positions h or hÃ. Permanent manual gear-
shi ing p must be switched o (
ECO Assist analyses data for the vehicle's expec-
ted route. This allows the system to optimally
adjust the driving style for the route ahead, save
fuel and recuperate.
ECO Assist is displayed on the Assistance
menu( page 282).
/
179
page 189).
/