A8 Vertical Measurements Using View Finder
Challenge: Measure an object where it is impossible to receive laser
reflection from tall object
Result
Viewfinder
Button.
Press again to
change power
up to 3X
and Inclination, Method #2
• Press Pythagoras button 2X
• Activate viewfinder and target object
onscreen.
• Press and release the DIST button.
DISTO will lock in the degrees of angle
if no reflection from laser is available
• Rotate DISTO to base of object and
take a direct distance measurement.
You can use the viewfinder again if
viewing the laser is difficult with your
eye
2X
TRIPOD MOUNTING HIGHLY RECOMMENDED!