Advertisement
Measuring Area and Volume
The
Measuring Area and Volume (feet, inches, meters)
• With DISTO turned on and laser active, press the
mode or 2 times to enter volume mode. Visually confirm mode by viewing
the square (area) or box ( volume) in top left corner of DISTO display.
• Place DISTO against one wall and measure to the opposite wall for length.
Immediately follow with width for square units or width and height for volume
units. Always measure height last in the volume mode.
• DISTO will calculate the total area/volume units and display the result.
Note: Press the CLEAR button if you make a mistake to clear the last
measurement taken and then proceed again.
SPECIAL FEATURE DISTO Models A5, A6, A8.
press and hold the
button until the DISTO beeps and recalculates the results to display the
following: (This is why it is important to take the height measurment last!)
Perimeter: ideal for baseboards for instance
Wall area: perfect for plastering and painting
Area: ideal e.g. for flooring, architecture and real estate
Volume: important e.g. for air-conditioning and real estate appraisers
All DISTO Models Included
button has two functions, area (L X W) and volume (L X W X H)
1 time to enter area
Upon completion of a volume measurement
A5, A6, A8 Typical Display
Advertisement
