Voxelab Proxima 6.0 Quick Start Manual page 5

Environment Requirements
Temperature: RT 15-30℃
Moisture: 20%-70%
Photopolymer Resin Storage
Unused photopolymer resin needs to be stored in a dark, dry, cool place, and out
of the reach of children. The resin stored at low temperature should be shaken
well and used at room temperature (above 20℃).
Photopolymer Resin Requirements
Do not abuse the photopolymer resin. Please make sure you use the Voxelab
photopolymer resin or the photopolymer resin from the brands accepted by
Voxelab.
Notes on model layout
Try to avoid inverted loopholes of model layout. Reduce exposure time when
printing models with dense layout.
Legal Notice
Flashforge shall not be responsible for any safety incident caused by the
customers's own modification or disassembly of the equipment.
All the information in this document is subject to any amendment or change
without the official authorization from Voxelab.
Second edition（February 2021）
@Copyright 2021 Zhejiang Flashforge 3D Technology Co., Ltd. All rights reserved
3