Water Control Corporation SF Series Owner's Manual page 21

DAY OVERRIDE/TIME-DRIVEN
10 D
USER PROGRAMMING MODE
REGEN. TIME
FLOW CHART
02:OOHR
User Programming Mode
Press and hold the Down and Up buttons simultaneously for 3
seconds to enter User Programming mode.
To navigate, press the Extra Cycle button to advance to the next
value. Press the Left button to retreat to the previous value.
Where applicable, use the Up and Down buttons to adjust a value as
desired.
After progressing through all available values, the timer will return
to Normal operation.
Fleck NXT2 Timer
Example:
Range: Off - 99 Days
Example:
Range: 0 - 23 Hours 59 Minutes.
DAY OVERRIDE/TIME-DRIVEN
10 D
REGEN. TIME
02:OOHR
HARDNESS - GPG
025
VOLUME REMAINING - G
09999
END
Example:
Range: Off - 99 Days
Example:
Range: 0 - 23 Hours 59 Minutes.
Example:
Range: 1 - 999 grains per gallon
Example:
Range: 1 - 99999 gallons