Water Control Corporation SF Series Owner's Manual page 19

TIMER FEATURES continued...
Push Settings
The ability to transmit settings from one unit to all other
connected units. Select the desired Master Programming
settings on one unit then push the same settings to all other
connected units. After push settings are complete, you may still
make unique changes to individual units.
Auxiliary Relays
The NXT2 has two auxiliary relays available based on cycle,
time, or volume.
AUX.1: CYCLE BASED
SP BW BD RR RF SB
AUX.1:TIME BASED-START TIME #1
1 M
AUX.1:TIME BASED-END TIME #1
5 M
AUX.1:VOLUME BASED - VOLUME-G
00100
AUX.1:VOLUME BASED - DURATION-S
0010
Activates during selected cycle step
Activates upon selected start time
(Range: 0-91 minutes)
Deactivates upon selected end time
(Range: Start Time plus 1 minute)
Activates when selected volume (gallon)
is reached (Range: 0-99999)
Selected Duration in Seconds
(Range: 0-9999 seconds)
Fleck NXT2 Timer