Table of Contents
Advertisement
POWER SUPPLY CONNECTIONS
Installing the Power Supply:
NOTE: Power Supply includes a harness with 2 black wires
that connect to circuit board, see page 15.
1. Insert black and black transformer wires into 24VDC input
of control.
2510/2750/2815/2850/2900 Valves:
Hinge Mount: mount per valve model noted
3150/3900 Valves:
Hinge Mount: mount per valve model noted
18 • Fleck NXT2 Timer
Communication Cables
Communication Cables
NETWORK/COMMUNICATION CABLES
AND CONNECTIONS
Use a CAT5 or better Network/Communication cable.
Connect the network/communication cable rst before
programming.
The maximum cable length between timers is 100 feet.
Connect each unit in series (do not form a loop) together from
one communication port to the next communication port. It
does not matter which one goes to the next one.
Power Supply
Meter Cable
Power Supply
Wire Harness
Meter Cable
44404 Rev A
Wire Harness
44403 Rev A
Advertisement
Table of Contents
