Advertisement
VideoPhone Operation (continued)
Extension Phones
You cannot use extension phones dur-
ing a videocall; the VideoPhone stops
sending and receiving images. To
restore the picture, both you and the
other person must press
after the
extension phone has been hungup.
One-Way Video Calls
The one-way video feature allows you
to receive images without being seen
by the other person. When youreceive
a video call and do not wish to be seen,
do not press (VIDEO). After five seconds,
the message "Press VIDEOto be
seen'will disappear from the screen.
Self View
Press
at anytimeto display
a mirror image of yourself. While your
picture is displayed, you can check
your position in the picture, adjust
the camera angle, use the BRIGHT
control, or change the lighting in the
room to enhance your image.
If the videophoneis notin use,
press
again to turn off
the camera.(If you leaveit on, the
camerawill automatically switch off
after two minutes.)
During a video call, pressing .
SELF VIEW) will produce either
Picture-In-Picture, or Full-Screen
SELF VIEW.
24
i
-: YideoPhoné
©
[zee] ea)
5
ABC
DEF
Picture-In-Picture: Press
to display a mirror image of yourself
in the lower right cornerof the
screen. Press
again to
remove your picture.
Full-Screen: Press
immediately after removing your
previous SELF VIEW imageto dis-
play your image onthefull screen.
During Full-Screen SELF VIEW, the
other person's imagewill disappear
while yours is displayed. The other
person will continue to see you.
Press
again to remove
your picture and restore the other
person's image.
VideoPhone Operation (continued)
Screen Brightness
Thiscontrol affects only your video
screen. During a video conversation,
it changes the appearanceof the
image you are viewing, but will not
affect your appearanceon the other
screen.
To adjust screen brightness, press
BRIGHT), then press the up or down
arrows on the [VOLUME] control.
There are 16 brightness levels. Each
time you press the VOLUME control,
brightnessis raised or lowered by
one level. Current brightnesslevelis
displayed on the screen as you make
adjustments. When you reach maxi-
mum or minimum brightness, you will
hearfive beeps.
Press (BRIGHT| when adjustment has
been made.
Camera Focus
Camera FOCUSadjusts both the
sharpnessof video images and the
smoothness of motion you see on
your screen.
There are five focus levels. At the
highest level, pictures are sharpest
but motion may appear less smooth
than normal. At the lowestlevel,
pictures are softer but movements
appear morefluid and natural.
vinEo
-
Lila
(wan)
SE5-2949
To adjust image sharpness, press
FOCUS], then press the up or down
arrows on the [VOLUME] control.
Eachtime you press the VOLUME
control, sharpnessis raised or low-
ered by onelevel. The currentlevelis
displayed on the screen as you make
adjustments. When you reach the
maximum or minimum level, you
will hear five beeps.
Press (FacUS) when adjustment has
been made.
During a video call, the FOCUS
control affects only images received
from the other VideoPhone.If you
press
during a videocall,
the FOCUS control will not work
and you will hear five beepsif you
press (Focus).
(Continued)
25
Advertisement
