AT&T EL52103 Quick Start Manual
Dect 6.0 cordless telephone/answering system with caller id/call waiting
Hide thumbs
Also See for EL52103:
- User manual (103 pages) ,
- Quick start manual (39 pages) ,
- User manual (35 pages)
Table of Contents
Related Manuals for AT&T EL52103
Summary of Contents for AT&T EL52103
- Page 1 Quick start guide EL52103/EL52113/EL52203/ EL52213/EL52253/EL52303/ EL52313/EL52333/EL52353/ EL52403/EL52413/EL52503/ EL52513 DECT 6.0 cordless telephone/ answering system with caller ID/call waiting Scan the QR code for support information...
-
Page 2: Important Safety Information
Avoid using a telephone during a thunderstorm. There may be a slight chance of electric shock from lightning. Please refer to the online EL52103/EL52113/EL52203/EL52213/EL52253/ EL52303/EL52313/EL52333/EL52353/EL52403/EL52413/EL52503/ Do not use a telephone in the vicinity of a gas leak. Under certain circumstances, EL52513 DECT 6.0 cordless telephone/answering system with caller ID/call... - Page 3 Important safety information Important safety information Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe CAUTION: To prevent risk of fire or battery explosion, replace with the correct manner. Do not burn or puncture. Like other batteries of this type, if burned or battery type.
-
Page 4: Table Of Contents
Table of contents Install Important safety information ....................1 Telephone base Install ................................5 Wall-mount installation (optional) ..................7 Handset overview ..........................8 Telephone base overview ......................11 Initial basic settings ........................12 Date and time ..........................12 DSL filter Record your own announcement ..................12 Number of rings..........................13 Ringer volume ..........................13 LCD language ..........................13... -
Page 5: Install
Install Wall-mount installation (optional) Battery Install the battery, as shown below. Plug the telephone line into Insert the extended tabs of the the telephone base. wall-mount bracket into the slots on the back of the telephone base. Push the telephone base down until it is securely in place. -
Page 6: Handset Overview
Handset overview Handset overview MENU/ Press to display the menu. Once in the menu, press to select an item or save an SELECT entry or setting. p DIR/ Press to scroll up while in menus. Press to increase the listening volume when on a call. VOLUME Press to show directory entries when the handset is not in use. -
Page 7: Telephone Base Overview
Handset overview Telephone base overview HANDSET 1 ANS ON MSG # 10:30 Handset display The battery icon flashes when the battery is low and needs Telephone base charging. Press to turn the built-in answering system on The battery icon animates when the battery is charging. or off. -
Page 8: Initial Basic Settings
Initial basic settings Initial basic settings Number of rings After you install your telephone or power returns following a power outage, the handset will prompt you to set the date and time. To skip setting the date and time, press /CANCEL on the handset. -
Page 9: Voice Language
Initial basic settings Operate Voice language Steps Operation Making a call /SPEAKER Press PHONE/FLASH -> Note: This feature is available in Canada version only. Enter the telephone number. The voice prompt language is preset to English. You can select English or French to Enter the telephone number ->... -
Page 10: Bluetooth
1. Press and hold /REPEAT on the telephone base for 4 seconds. 2. The telephone base announces one of the following connection status: Your EL52103/EL52113/EL52203/EL52213/EL52253/EL52303/EL52313/EL52333/ EL52353/EL52403/EL52413/EL52503/EL52513 telephone system is enhanced with “Bluetooth headset is connected”; Bluetooth feature. You can pair a Bluetooth headset to your telephone system and “No Bluetooth headset paired”;... -
Page 11: Directory
Directory Caller ID Save a caller ID log entry to the directory The directory can store up to 50 entries, which are shared by all system devices. Operation Steps CID in idle mode -> to scroll through the list. 2. When your desired caller ID entry displays on the handset -> SELECT. Add an entry in the MENU. -
Page 12: Answering System
Answering system Answering system About answering system and voicemail Turn answering system on or off The answering system must be turned on to answer and record messages. Your telephone has separate indicators for two different types of voice messages: those left on the built-in answering system and those left at your telephone service Using the telephone base: provider’s voicemail. -
Page 13: Message Playback
For C-UL compliance Answering system In compliance with the bilingual requirements for safety, caution, and warning markings of Canadian Federal and Provincial/Territorial statutes and regulations, Message playback the French version of Important safety information is included. Mesures de sécurité importantes Using the telephone base Ce symbole vous alertera d’informations importantes ou d’instructions Press... - Page 14 For C-UL compliance For C-UL compliance Remplacez les piles uniquement tel que décrit dans votre guide d’utilisation Spécifiquement en rapport avec les téléphones sans fil (Page 6). N’incinérez pas et ne percez pas les piles — elles contiennent des Confidentialité : Les mêmes caractéristiques qui rendent les téléphones sans fil produits chimiques caustiques.
-
Page 15: Fcc Part 68 And Acta
For C-UL compliance FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements Mesures préventives pour les utilisateurs de stimulateurs cardiaques implantés adopted by the Administrative Council for Terminal Attachments (ACTA). The label dans l’organisme on the back or bottom of this equipment contains, among other things, a product Stimulateurs cardiaques (ne s’applique qu’aux téléphones sans fil numériques) :... -
Page 16: Https://Telephones.att.com
Industry Canada This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, This device contains licence-exempt transmitter(s)/receiver(s) that comply with and (2) this device must accept any interference received, including interference Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). - Page 17 Advanced American Telephones will retain defective parts, modules, or you, transportation, delivery or handling charges prepaid. Advanced American equipment. Replacement of Product, at Advanced American Telephones’ Telephones assumes no risk for damage or loss of the Product in transit. option, is your exclusive remedy. You should expect the replacement to take 6.
-
Page 18: Technical Specifications
Technical specifications RF frequency band DECT frequency: 1921.536MHz — 1928.448MHz Bluetooth frequency: 2402.000 - 2480.000 MHz Channels Telephone base voltage (AC voltage, 60Hz) 96 — 130 Vrm Telephone base voltage 6VDC @0.4A (DC adapter output) Max. PS1 or LPS Charger voltage (AC 6VDC @0.4A adapter output) Max.