Advertisement
Memory Dialing (continued)
ee
One-Touch Dialing
Storing numbers:
1. Press (PROG).
2. Enter telephone number and
verify by checking the video
display. Press
once to enter
hyphensif desired, to make the
numbereasier to read.
3. Press the memory button where
the numberis to be stored. The
screen displays the message
"Number Stored."
Repeatsteps 2 and 3 to store
another number in memory.
4. Press (PROG).
Dialing numbers in memory
1. Lift handset(or press (SPKA)) and
listen for dial tone.
2. Press a memory button. —
18
1. Press
3. Press memory
2. Enter t phone
button.
numbet.
4. Press ai).
enc
Focus
o>)
i}
|=
[=]
-
Vv
"
ou
-
om
(«|
Entering Dialing Delays
Pause:To insert a two-second delay
in the dialing sequence, press
twiceto insert a "P" into the number.
This is useful if you must wait for an
outside line before dialing.
Wait: To insert a 30-second delayin
the dialing sequence, press
three times to insert a "W"into the
'number. This is useful when a longer
delay is required before entering an
access codefor services such as
telephone banking or alternate long-
distance access. You can cancel the
delay and resumedialing by pressing
any memory button.
MemoryDialing (continued)
ll
Storing Special Dialing
Commands
The star (*) and pound (#) symbols
can be stored in memorylocations.
This is useful for international dialing,
telephone banking, special services
provided by your local telephone
company, or other computer-related
applications.
You can also store a Flash command
(F) in memory (see page 15).
Storing Numbers Just
Dialed
Whenever you make a telephonecall,
the numberyou dialed can be stored
in memory without re-entering the
number.
1. Press (PROG).
2. Press (REDIAL).
3. Press the memory button where
the numberis to be stored. The
screen displays the message
"NumberStored."
4. Press (PROG).
Viewing Numbers Stored In
Memory
Whenthetelephoneis not in use,
press any memory button to display
the number storedin that location.
If the memory location is empty, the
message "Nothing is stored here"will
be displayed.
Memory Erase
To clear a memory location and leave
it empty:
1. Press (PROG). ©
2. Press the memory button next to
the location you wantto clear. The
screen displays the message
"Numbererased"
3. Press (PROG).
To Disable Call Waiting
If you subscribe to Call Waiting
service, you may wantto disableit
before making video calls to avoid
disruption or loss of the video picture
(see page 27).
,
In many areas, you can dial x70 to
disable Call Waiting: An easy way to
do this is to enter
(7) {@) before .
entering the telephone number into
a memory location (where you store
the numberof another VideoPhone).
Each time you use One-Touch
Dialing to call that number, Call
Waiting will be disabled until you
hang up.
(Continued)
19
Advertisement
