ELECTRIC VEHICLE - ELECTRICAL
COMPONENTS
REVERSE BUZZER
See General Warnings on page 1-1.
TESTING THE REVERSE BUZZER
16 – Reverse Buzzer
REVERSE BUZZER REMOVAL
1.
Disconnect the batteries and discharge the controller. See Disconnect the Batteries – Electric Vehicles,
Section 1, Page 1-5.
2.
Remove instrument panel. See Instrument Panel Removal on page 4-9.
3.
Disconnect the 18-gauge pink wire and orange/white wires from reverse buzzer.
4.
Remove the two screws from the reverse buzzer. Remove the reverse buzzer from the center dash panel.
REVERSE BUZZER INSTALLATION
1.
Install the reverse buzzer in the reverse order of removal. Tighten screws to 4 in·lb (0.45 N·m).
2.
Reconnect wires. Pink on positive, orange/white on negative.
3.
Connect the batteries. See Connect the Batteries – Electric Vehicles, Section 1, Page 1-5.
2021 Carryall 300 Maintenance and Service Manual
13
Reverse Buzzer
Page 13-5