External Inserts - Waves SuperRack SoundGrid User Manual

External Inserts

You can add external inserts to a plugin rack. An external insert follows the same routing path as plugins and can be
Using an External Insert
The Latency knob is used to adjust the amount of delay added to the signal returning from the external device.
Unlike a plugin, an external insert does not declare its delay to the latency compensation engine, so this must be
done manually.
93
moved up and down the rack to change its position in the processing chain.
Choose a plugin slot in the rack.
Select External Inserts from the Plugin Menu.
Choose an available insert from the menu.
Click on the External Insert icon to open the control page.
Select the physical send and return I/Os using the drop-down menus.
I/Os must be compatible with the rack configuration.
Use the Device cell to rename the insert, if needed. Use the Insert drop-
down menu to move between inserts. If no send is assigned, the insert
will be bypassed. It remains in the rack and its place in the processing
chain is unchanged.
A multi-channel full-scale meter indicates the level of the return signal.
SuperRack SoundGrid / User Guide