Waves SuperRack SoundGrid User Manual page 114

B O
ASIC PERATION
Automixer's position in the signal flow of a rack is after processing and after fader. It works on mono or stereo racks.
1. Click the Dugan Engine On button in the Global Control panel (left side).
2. Use the Dugan Speech Plugin button at the top of each panel to enable the automixer on all racks for which
Dugan Speech automixing is desired. Disable all non-live-talking racks where automixing will not be used.
Disabled racks are grayed out.
3. Click the Auto button to turn on the automixer for that rack. Effective automixing depends on correct input gains
for each rack. Adjust each rack's input gain so that the level display is green.
4. Set the Weight controls to balance the rack's automix gain and establish the priority of one speaker over others.
Weight levels can be changed by dragging the faders up or down.
5. Assign racks to Dugan groups. A group functions as a separate and independent automatic mixer. Each rack
can be assigned to one of three groups: a, b, or c.
For detailed instructions, please refer to the
Dugan Speech requires a separate license. If a license is not found, the Dugan mode selector button will be grayed out.
114
Waves Dugan Automixer User Guide on the Waves download page.
SuperRack SoundGrid / User Guide