Waves SuperRack SoundGrid User Manual page 51

S D
ETTING UP EVICE
C C
LOCKING ONSIDERATIONS
When a device is shared by two systems both systems must be locked to the same clock master. If a client system
assigns a shared device that's part of a system with a different clock source, something must be done to rectify the
difference.
If this clocking configuration is not acceptable, cancel from the dialog. Create a clock source that is common to the
host system and the client system and then start sharing.
51
S
HARING
For other SuperRack systems to access a device in your Inventory, you must
enable sharing for the device:
• Select the assigned device you wish to share.
• Select Share from the device's drop-down menu. The sharing symbol
Only the manager of a device can activate its sharing.
Other systems can now assign the I/O device to their Inventories and patch
available I/O channels. Output I/O channels patched by the manager cannot
be shared with other systems until the device's manager releases the
patches or removes the device from its Inventory.
W S
HEN HARING
When assigning a shared device whose clock source is not the same as that of the
client system, this prompt will appear (left). Click OK to set the clock of the client
system as your system's clock. The shared device, or its master clock, is now the
local SOE clock master for all the devices in your local SoundGrid network.
will appear on the device icon.
SuperRack SoundGrid / User Guide