Output Section - Waves SuperRack SoundGrid User Manual

Plugin icon indicators
Plugin status is indicated by its icon's shading.
Plugin enabled and not bypassed
Plugin enabled and bypassed
Plugin disabled.
Note: Adding, removing, disabling, or moving a plugin changes the structure of the plugin chainer, which can
result in a brief interruption. Do not make these changes when a dropout is not acceptable.
Bypassing a plugin or changing its parameters can be done at any time.

Output Section

The output section patches the rack to an output device. Rack output gain can also be controlled here.
Output routing
Use this drop-down menu to select the output I/O device and the rack output type.
Output Gain and Meter
Output gain control, -18 dB to +18 dB. Full-scale output meters match the I/O device format. The meter
is red when the rack output signal clips. Click on the meter to reset. Clip threshold and clip hold are
controlled in the Settings page.
Mute
Mutes the rack.
112
SuperRack SoundGrid / User Guide