Waves SuperRack SoundGrid User Manual page 45

Three buttons at the bottom of the slot provide access to hardware setup controls.
Item
Gear button
ID
FW
Gray Firmware is compatible with installed mixer software.
Blue Firmware is compatible with installed mixer software, but a newer version exists. Firmware should
Red Firmware is not compatible or is out of date. Click the FW button to re-flash device hardware.
45
Purpose
Control Panel access
Locate hardware device
Firmware status and re-flash start
be updated as soon as possible.
Action
Click to access device's control panel
to adjust preamps, configure
channels, and control its clock. This
button is grayed out if the device
does not support a control panel.
Activates a light on the front panel of the
hardware device associated with the
icon.
Click the FW button to start firmware
update.
SuperRack SoundGrid / User Guide