Advertisement
Available languages
Available languages
ENG
DOWNLOAD THE SMARTWATCH APP:
Scan the QR code to download and
install the APP, or search in your APP
Store or Play Store the name of the
APP "Da Fit".
Device requirements: iOS 9.0 and
above;
Android
compatible with Bluetooth 5.0.
CHARGE AND ACTIVATE THE SMARTWATCH:
Before using the watch for the first time, you need to fully charge
the battery, use the magnetic charging cable provided to connect
the metal charging contacts on the back of the watch, connect the
other end of the charging cable to an USB charger or an USB
computer interface that provides a minimum of 5V/1A and a
maximum of 5V/2A.
The estimated time for a full charge is between 2-3 hours. To
extend battery life, never let it discharge to 100% and charge it
regularly, even if you are not going to use it.
Caution: Do not make the magnetic charging cable any 2
pins connect with conducting material at same time, it
may cause short circuit.
APP PAIRING:
Open the App DaFit and click "Add Device" to find the watch you
want to connect to. If there is more than one device nearby, filter
by the MAC address of the smartwatch (Settings > About).
6.0
and
above,
13
Advertisement
