The Session Navigator; F1-F8 Functions - PRESONUS FaderPort 16 Owner's Manual

5 Cubase / Nuendo (MCU)
5.4

The Session Navigator

5.4 The Session Navigator
5.4.1

F1-F8 Functions

The Session Navigator provides quick controls that you need to navigate
your session and your workflow. Each button alters the functions of the push-
button encoder and the Next and Prev buttons on either side. Pressing Shift
with any of these buttons will allow you to access the F1-F8 Functions.
1 2 3
1. Channel. Encoder scrolls and selects individual channels.
Navigation buttons adjust the current bank by one channel.
2. Master. The Encoder controls the Master bus level. Navigation buttons
switch between the left / right panning and front / rear panning.
3. Zoom. Encoder controls horizontal zooming.
Navigation buttons control vertical zooming.
Power User Tip: Zoom works for whichever window is currently is in focus, not just
the arranger window.
4. Click. At the time of publication, this function is not available.
5. Scroll. Encoder controls Timeline scrolling by 1/16 note
increments. Use the Navigation buttons for faster scrolling.
6. Section. Enables scrubbing control with the encoder and navigation buttons.
7. Bank. Encoder and navigation buttons scroll through channels
in banks of sixteen or eight (model dependent).
8. Marker. Encoder and navigation buttons scroll through
markers. Press the Encoder to drop a marker.
Pressing Shift with any of the Session Navigator buttons will allow you
to switch between the first eight Channel Visibility configurations:
F1. Channel Visibility Configuration 1
•
F2. Channel Visibility Configuration 2
•
F3. Channel Visibility Configuration 3
•
F4. Channel Visibility Configuration 4
•
• F5. Channel Visibility Configuration 5
F6. Channel Visibility Configuration 6
•
F7. Channel Visibility Configuration 7
•
F8. Channel Visibility Configuration 8
•
FaderPort™ Multichannel Production Controllers
4 5 6 7
Owner's Manual
8
41