The Session Navigator - PRESONUS FaderPort Owner's Manual

2 Studio One
2.4

The Session Navigator

2.4 The Session Navigator
The Session Navigator provides quick navigation and session
controls. Each button alters the functions of the push-button
encoder and the Next and Prev buttons on either side.
Pressing SHIFT + Prev will Undo the last action. Pressing
SHIFT + Next will Redo the last action.
1 2 3 4
1. Link. Encoder controls any parameter beneath your mouse.
Navigation buttons select Next and Previous tracks respectively.
To lock a parameter to this encoder, press SHIFT + Link.
Power User Tip: The Channel Editor is a powerful feature in Studio One Pro that allows
you to map multiple parameters to the same control, with independent range/polarity/
curve controls. Additional XY vector pads can be assigned with individual parameters;
and much more.
2. Master. Encoder controls the Master level. Push the Encoder to reset the Master
level to 0 dB. While in this mode, the navigation buttons will control banking.
Press SHIFT + Master to enable F1 User function. See Section 2.4.1 for details.
3. Pan. Encoder controls panning. Navigation buttons scroll
through track list. Push the Encoder to reset the level to 0 dB.
Press SHIFT + Pan to use the fader to control panning.
4. Click. Turns the metronome on/off. The metronome can be
engaged or disengaged while any mode is active. Press SHIFT +
Click to enable F2 User function. See Section 2.4.1 for details.
5. Channel. Encoder controls individual channel scrolling. Navigation buttons
adjust the currently visible fader bank on the FaderPort by one channel. Press
SHIFT + Channel to lock the channel controls to the currently selected track.
Note: Channel Lock is only available in Studio One v4 and higher.
6. Section. Encoder nudges the selected event. Use the navigation buttons
to navigate through the events on the Arranger track. Press SHIFT +
Section to enable F3 User function. See Section 2.4.1 for details.
Power User Tip: Enable Snap to Grid for coarse nudging. Disable it for fine tuning.
7. Scroll / Zoom. Encoder controls timeline scrolling. Push the encoder to
fit the timeline to the window size. Use the navigation buttons to scroll
through the track list. Press SHIFT + Scroll to enable Zooming. While Zoom
is active, encoder controls horizontal zooming. Navigation buttons control
vertical zooming. Press the encoder to undo zooming in both directions.
8. Marker. Encoder moves the playback cursor in the Timeline. Use the navigation
buttons to scroll through markers. Press Encoder to drop a marker. Press
SHIFT + Marker to enable F4 User function. See Section 2.4.1 for details.
FaderPort™ Multichannel Production Controllers
5 6 7 8
Owner's Manual
8