Edit Plug-Ins Mode; Sends Mode; Pan Mode; Timecode - PRESONUS FaderPort 16 Owner's Manual

6 Sonar (MCU)
6.7

Mix Management

6.6.1

Edit Plug-ins Mode

Track1 Track2 Track3 Track4 Track5
Type Type Type Type Type
P1
6.6.2

Sends Mode

6.6.3

Pan Mode

6.6.4

Timecode

6.7
Mix Management
1
2
3
4
5
Pressing Edit Plug-ins will display the first insert slot for every channel in the
scribble strips.
Press the Select button below any of the insert slots to enable or disable that plug-in.
Pressing the Sends button will allow you to adjust the first assigned sends for every
track in the session.
Press the Sends button twice to control all the send functions for
the currently selected track (Level, Pre/Post, Pan, etc.).
Pressing the Pan button will allow you to adjust the pans for every
track using the faders. Press the Pan button a second time to control
the send pans and the main pan for the currently select channel.
Press the Shift and Track buttons simultaneously to view the Timecode on the last
four scribble strips. This follows the type of Timecode you have selected from within
Sonar. While Timecode is active, the faders will continue to control level.
1. Audio / Inputs. Press to view Audio tracks only. Press Shift + Audio to create a
new audio channel.
2. VI / MIDI. Press to view all MIDI tracks. Press Shift + VI to create a New MIDI Track.
3. Bus / Outputs. Press to view all Auxes.
4. VCA / FX. At the time of publication, this button has no function.
5. All / User. At the time of publication, this button has no function
FaderPort™ Multichannel Production Controllers
Owner's Manual
50