2
Studio One
2.6
Automation Controls
2.5.1
F1-F8 Functions
2.6
Automation Controls
2.6.1
User Functions
Using Shift plus any Session Navigator button will access alternate
functions for your FaderPort. By default, these are assigned as follows:
•
F1. Open Inspector
F2. Open Editor
•
F3. Open Mixer
•
F4. Open Browser
•
F5. Open Scratch Pad (Studio One Pro)
•
F6. Open Tempo Track
•
F7. Open Arranger Track (Studio One Pro)
•
F8. Open Marker Track
•
Power User Tip: The default assignments for the Function buttons can be customized
using the FaderPort device editor. See Section 2.8.2 for more information.
1
6
1. Latch / Save. Engages Latch Automation on currently selected track or plug-in.
Press the SHIFT and Latch buttons simultaneously to save your session.
2. Trim / Redo. At the time of publication, Trim Automation
is not available in Studio One. Press the SHIFT and Trim
buttons simultaneously to redo the last action.
3. Off / Undo. Turns Automation off on currently selected track or plug-in.
Press the SHIFT and Off buttons simultaneously to undo the last action.
4. Read / User 3. Engages Read Automation on currently selected track
or plug-in. Press the SHIFT and Read buttons simultaneously to engage
the User 3 function. See Section 2.5.1 for more information.
5. Write / User 2. Engages Write Automation on currently selected track
or plug-in. Press the SHIFT and Write buttons simultaneously to engage
the User 2 function. See Section 2.5.1 for more information.
6. Touch / User 1. Engages Touch Automation on currently selected
track or plug-in. Press the SHIFT and Touch buttons simultaneously to
engage the User 1 function. See Section 2.5.1 for more information.
By default, the three User functions are set as follows:
User 1. Show/Hide Automation
•
User 2. Snap to Grid
•
•
User 3. Autoscroll On/Off
User buttons can be reassigned from the Control Link window. See Section 2.8.2.
FaderPort™ Multichannel Production Controllers
2
3
5
4
Owner's Manual
11