Bosch PRAESENSA Manual page 131

PRAESENSA
3.
4.
5.
6.
Next step:
Programming settings, page 132
Bosch Security Systems B.V.
– PRAESENSA is default set for using a secured connection between the system
controller and other network devices.
– An initial user account automatically gets the secured configuration administrator
rights.
– Deleting the Initial (administrator) setup user account can only be done by adding a
new user account with administrator rights and then delete the initial one. See User
accounts.
st
Only at 1 / initial logon > a OMNEO security username and OMNEO passphrase is
automatically generated by the system controller:
– You need this security username and passphrase for a secure firmware upload.
– If required, see Change user name and passphrase.
Click the Create button > A web browser page appears, showing the following elements:
– On top of the web browser page, from left to right: the name of the device (system
controller), your username and the software release number. See (Mandatory)
software).
– The name of, and link to, the system controller.
– Configure - A button that opens the configuration items selection.
– Diagnose - A button that opens the diagnostics items selection.
– Security - A button that opens the system Security and Open Interface item selection
(e.g. download certificate).
– Print configuration - A button that opens the configuration printing utility.
– About - A button that opens the Open source licenses.
– Main frame - A frame that displays the selected PRAESENSA web browser page.
– Home - A button that returns to the Home web browser page where you could select:
- The (new) language and the continue button.
– Logout - A button which returns you to the logon webpage. You have to logon the
configuration again, if required.
Click the Home button to select the English (UL 2572) language for the webserver GUI
and web browser pages and click the continue button to access the web browser pages
in the selected language.
Click the Submit button:
– Notice that the changes are not permanent until the configuration is saved. See Save
configuration topic in Programming settings, page 132 .
Underwriters Laboratories Listing Document (ULLD)
Programming options | en 131
2021.12.21 | V0.15b | F.01U.402.882