Mocka Kalley Assembly Instructions

Dining table

Kalley Dining Table

Assembly Instructions

Thank you for your purchase.

Please follow the instructions for correct assembly. While we took great

effort to ensure these assembly instructions were correct at the time of

printing, sometimes updates are required post production. For the most

up to date versions please refer to the product page on our website.

mocka.com.au/mocka.co.nz

long bolt

nut

x16

Allen Key

bracket

WARNING:

Any furniture that is not anchored to a wall has the potential to tip over in certain

circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.

Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor

with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device

provided should fit most wall types, but please note that different wall materials may require different fixing

devices from those supplied.

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558

bolt

plastic

glide x4

Hardware Supplied

Phillips screwdrivers and hammer required

For quicker assembly, we recommend the

use of a power drill on a low-speed setting.

short bolt

Table of Contents

Do you have a question about the Kalley and is the answer not in the manual?

Page 1 Phillips screwdrivers and hammer required For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 2 Insert 8x nuts (B) into panel [5] and panel [4]. Attach panels [2] to secure with 4x long bolts (A).Tighten with an allen key (E). panels [4] and [5], secure with 8x long bolts (A).Tighten with an allen key (E). mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 3 Kalley Dining Table Assembly Instructions Attach panel [3] to splice panel [4] as shown. Attach panel [6] to splice panel [5] as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 4 Attach panels [3] and [4] to panel [1] secure with 8x bolts (C). Tighten with secure with 4x long bolts (A).Tighten with an allen key (E). an allen key (E). mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 5 Once assembled lift furniture into place, do not drag. Tighten with an allen key (E).Attach 4x plastic glides (G) to the legs You’re done, enjoy! using a hammer as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...