Table of Contents
Advertisement
6.2
Mounting/dismantling
Danger - Electric voltage!
Risk of death and fire due to electric voltage of 100 to 240 V.
–
–
Caution! The device can sustain damage when coming into contact with
hard objects!
The plastic parts of the device are sensitive.
–
–
In Germany the flush-mounted insert must only be installed in flush-mounted boxes according to
DIN 49073-1, Part 1, or suitable surface-mounted housings.
Different installation standards apply in other countries. These are to be taken into account
when used in connection with a different support ring and flush-mounted box.
Fig. 1:
Wall mounting: pulling off the attachment
Product manual 2CKA001473B8291
Work on the 100 - 240 V supply system may only be performed by
authorised and qualified electricians.
Disconnect the mains voltage prior to mounting and dismantling.
Pull the attachment off only with your hands.
Do not lever parts off with screwdrivers or similar hard objects.
Connection, installation / mounting
1. Pull the attachment off.
–
If the device is already mounted
or assembled, pull off the
attachment from the flush-
mounted insert with the aid of the
frame.
│13
Advertisement
Table of Contents
