Specifications - Stihl KM 85 R Instruction Manual

Specifications

Engine
Single cylinder two-stroke engine
Displacement: 25.4 cc
Bore: 34 mm
Stroke: 28 mm
Engine power to 0.95 kW
ISO 8893: (1.3 bhp) at
8,500 rpm
Idle speed: 2,800 rpm
Cut-off speed (rated): 10,500 rpm
Ignition System
Electronic magneto ignition
Spark plug (resistor Bosch WSR 6 F,
type): NGK BPMR 7 A
Electrode gap: 0.5 mm
Fuel System
All position diaphragm carburetor with
integral fuel pump
Fuel tank capacity: 440 cc (0.44 l)
Weight
dry, without KombiTool
KM 85 R 3.9 kg
KM 85 R
Noise and Vibration Data
For further details on compliance with
Vibration Directive 2002/44/EC visit
www.stihl.com/vib.
KombiTool
For version see "Approved
KombiTools".
Noise and vibration data measurements
include idling and rated maximum speed
in the following ratios.
FCS-KM, FCB-KM, FS-KM,
FSB-KM, FH-KM and HT-KM 1 to 1
HL-KM
BF-KM, BK-KM, KB-KM,
KW-KM, BG-KM and SP-KM 1 - 6
The exact noise and vibration
specifications depend on the KombiTool
being used and are described in the
KombiTool's instruction manual.
Sound pressure level L to ISO 11201,
p
ISO 22868
KM 85 R: 92 dB(A) ... 98 dB(A)
Sound power level L to ISO 22868,
w
ISO 3744
KM 85 R: 106 dB(A) ... 109 dB(A)
Vibration level a to ISO 11789,
hv,eq
ISO 20643, ISO 22867
Handle, left
2
KM 85 R: 2.9 m/s ... 7.3 m/s
Handle, right
2
KM 85 R: 3.8 m/s ... 7.5 m/s
The K-factor in accordance with
Directive 2006/42/EC is 2.0 dB(A) for
the sound pressure level and sound
power level; the K-factor in accordance
with Directive 2006/42/EC is 2.0 m/s
for the vibration level.
REACH
REACH is an EC regulation and stands
for the Registration, Evaluation,
Authorisation and Restriction of
Chemical substances.
For information on compliance with the
REACH regulation (EC) No. 1907/2006
see www.stihl.com/reach.
Exhaust Emissions
1 - 4
The CO value measured in the EU type
2
approval procedure is specified at
www.stihl.com/co2.
The measured CO
determined on a representative engine
in accordance with a standardized test
procedure under laboratory conditions
and does not represent either an explicit
or implied guarantee of the performance
of a specific engine.
The applicable exhaust emission
requirements are fulfilled by the
intended usage and maintenance
described in this instruction manual. The
type approval expires if the engine is
modified in any way.
2
2
English
2
value was
2
21