Starting / Stopping The Engine - Stihl KM 85 R Instruction Manual

English
Starting / Stopping the
Engine
Controls
7
3
2
1
1 Throttle trigger lockout
2 Throttle trigger
3 Slide control
Positions of slide control
4 STOP-0 – engine off – ignition is
switched off
5 F – normal run position – the engine
is running or can start
6 START – ignition is switched on –
the engine can start
10
Symbol on slide control
7 h – stop symbol and arrow. To stop
the engine, push the slide control in
the direction of the arrow on the stop
symbol (h) to STOP-0.
Starting
4 Press down the trigger lockout lever
N
and squeeze the throttle trigger
and hold them in that position.
N
5
Move the slide control to START
N
and hold it there.
6
Now release the throttle trigger,
N
slide control and trigger lockout in
that order. This is the starting
throttle position.
8
Set the choke lever (8) to:
N
g if the engine is cold
e for warm start – also use this posi-
tion if the engine has been running
but is still cold.
Press the manual fuel pump
N
bulb (9) at least five times – even if
the bulb is filled with fuel.
Cranking
8
Place the power tool on the ground
N
so that it rests on the machine
support: Check that the working tool
is not touching the ground or any
9
KM 85 R