Table of Contents
Advertisement
Opening and closing the
drawer
Damage caused by liquids.
Liquids that get inside the drawer
can cause a short circuit.
Open and close a loaded drawer
carefully to prevent liquids from
spilling.
The drawer is equipped with a non-
slip liner which prevents dishware
from sliding around when the drawer
is opened and closed.
Open or close the drawer by pressing
lightly in the middle of the drawer
front.
Operating the drawer
Operating the drawer
Malfunction can occur due to dirty
and/or covered sensor buttons.
The sensor buttons do not react or
unintentional switching procedures
result, perhaps even the automatic
deactivation of the drawer.
Keep the sensor buttons and
indicators clean.
Do not place anything over the
sensor controls or indicators.
The drawer is operated via the sensor
buttons and the indicators.
Tap the On/Off button.
The last setting selected is
automatically activated and displayed
the next time the drawer is turned on.
Touch the Menu sensor button
repeatedly until the required
operating mode lights up.
Touch the Temperature sensor button
repeatedly until the segment for the
required temperature lights up in the
temperature display.
The drawer is set for continuous
operation mode (exception: Low
Temperature). The safety shut-off will
turn off the drawer after a maximum of
12 hours of continuous operation. If you
require a shorter operating time you can
limit the duration.
Touch the Duration sensor button
repeatedly until the required duration
lights up.
If a duration of 4 h is set, touching the
sensor button once more will restore
continuous operation.
47
Advertisement
Table of Contents
