Determining The Installation Position - Canon SX7 MARKII User Manual

Determining the Installation Position

Placing in Front of the Screen
Place the projector perpendicular to the screen
as far as possible.
A slight error in the projection angle can be
corrected using the [KEYSTONE] button
(P52).
Placing on a Level Place
Place the projector on a level place as far as pos-
sible.
A slight tilt can be corrected using the rear
adjustable foot. (P43)
Make sure that the installation position is
free from any obstacle that may block the
exhaust vent (fan) on the right side of the
projector and the air intake vent on the bot-
tom of the projector.
The screen must not be exposed to direct
sunlight or light from lighting equipment. In a
bright room, it is recommended to limit
ambient lighting in order to improve the
image quality.
Ceiling Mounting or Rear Projection
You can mount the projector on the ceiling (Ceiling mounted) with it turned up side
down or place it behind the screen (Rear) if you use a translucent screen. For ceiling
mounting or rear projection, you have to invert the projected image. (P97).
Ceiling Mounting
Screen
Optical axis
Rear Projection
33