Table of Contents
Advertisement
3
Press the [OK] button.
The result of keystone adjustment is memorized. If you place the projector at the same posi-
tion, the keystone adjustment is not necessary.
When the Keystone adjustment is selected, signals are processed digitally. The image may
look different from the original one.
The aspect ratio of the image may change after the keystone adjustment.
Keystone can be adjusted vertically and horizontally within the range of +/-20 degrees. The
amount of adjustment may be less than +/-20 degrees depending on the combination of the
amount of optical zooming, input signal type, and adjustment direction (vertical or horizon-
tal).
If the keystone distortion is too large to adjust, move the projector installation position (P32).
To reset the keystone adjustment to 0, press the [KEYSTONE] button again to display the
[Keystone reset] window. On the window, select [OK] with the [<] button, and then press the
[OK] button.
If you select [16:9 D. image shift] for [Screen aspect], the keystone adjustment will be dis-
abled. Project the image at right angle to the screen.
53
Hide quick links:
Advertisement
Table of Contents
