Table of Contents
Advertisement
Safety Instructions
Installation and Use
Pay attention to the following points regarding installation and handling of the projector.
Failure to do so may cause a fire, electric shock or personal injury.
• Do not use the projector where it might get wet, such as outdoors
or by bathtubs or showers.
• Do not place containers containing a liquid on top of the
projector.
• Make sure to implement anti-fall measures such as an anti-fall
wire when installing the projector in high places, for example,
installing it on the ceiling.
• Do not remove the cabinet from the projector or disassemble it.
The interior of the projector contains high-voltage components as
well as parts that are hot. If inspection, maintenance or repair is
required, contact the Canon Customer Support Center.
• Do not disassemble or modify the projector (including
consumable parts) or the remote control.
• Do not look directly into the exhaust vents during use.
• Do not insert any object into vents in the projector, such as the air
intake vent or exhaust vents.
• Do not place a pressurized can in front of the exhaust vents. The
pressure of the contents of the can may increase due to heat
from the exhaust vents and this could result in an explosion.
• When cleaning off dust or dirt from projector parts such as the
lens or filter, never use any spray that is flammable. Internal parts
that become hot may ignite and cause a fire.
• Do not use adhesives, lubricants, oils, or alkaline detergents for
maintenance of the projector. They could adhere to the cabinet
and damage it, possibly resulting in the projector falling from its
mounting and causing an accident or personal injury.
• As strong light beams are emitted
while the projector is in use, do
not look directly into the projector
lens. Doing so could cause an
eye injury. Pay particular attention to prevent small children from
doing so.
• Operators shall control access to the beam within the hazard
distance or install the product at a height that will prevent eye
exposure within the hazard distance.
16
Advertisement
Table of Contents
Troubleshooting
